API STD 617

API STD 617

Axial and Centrifugal Compressors and Expander-compressors
AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
Axial and Centrifugal Compressors and Expander-compressors
Axial and Centrifugal Compressors and Expander-compressors for Petroleum, Chemical and Gas Industry Services
AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS
Axial and Centrifugal Compressors and Expander-Compressors for Petroleum, Chemical and Gas Industry Services
Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries
Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries
Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries
Centrifugal Compressors for General Refinery Service
Centrifugal Compressors for General Refinery Services
CENTRIFUGAL COMPRESSORS FOR GENERAL REFINERY SERVICES
CENTRIFUGAL COMPRESSORS FOR GENERAL REFINERY SERVICES
CENTRIFUGAL COMPRESSORS FOR GENERAL REFINERY SERVICES

: In stock

: API

:

:

Format
$240.00

Publication Date: 09/01/2014 - Complete Document Changes Incorporated *

Description :

This standard specifies minimum requirements and gives recommendations for axial compressors, singleshaft and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, chemical, and gas industries. This part of API 617 specifies general requirements applicable to all such machines.

API 617 does not apply to fans (these are covered by API 673) or blowers that develop less than 34 kPa (5 psi) pressure rise above atmospheric pressure. API 617 also does not apply to packaged, integrallygeared centrifugal plant and instrument air compressors, which are covered by API 672. Hot gas expanders over 300 °C (570 °F) are not covered by API 617.

This part of API 617 contains information pertinent to all equipment covered by the other parts of this document. It shall be used in conjunction with the following parts, as applicable to the specific equipment covered:

— Part 2—Nonintegrally Geared Centrifugal and Axial Compressors,

— Part 3—Integrally Geared Centrifugal Compressors,

— Part 4—Expander-compressors.

Document Type : Complete Document

Edition : EIGHTH EDITION; ERTA 1: AUGUST 2016

Language : English

Page Count : 386

Publication Date : 09/01/2014

Revision : 8

Status : Current

Supplement : W/

Title : Axial and Centrifugal Compressors and Expander-compressors

Publication Date: 08/01/2016 - Base Document

Document Type : Base Document

Page Count : 2

Publication Date : 08/01/2016

Revision : 8

Status : Current

Title : AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS

Publication Date: 09/01/2014 - Complete Document *

Description :

This standard specifies minimum requirements and gives recommendations for axial compressors, singleshaft and integrally geared process centrifugal compressors, and expander-compressors for special purpose applications that handle gas or process air in the petroleum, chemical, and gas industries. This part of API 617 specifies general requirements applicable to all such machines.

API 617 does not apply to fans (these are covered by API 673) or blowers that develop less than 34 kPa (5 psi) pressure rise above atmospheric pressure. API 617 also does not apply to packaged, integrallygeared centrifugal plant and instrument air compressors, which are covered by API 672. Hot gas expanders over 300 °C (570 °F) are not covered by API 617.

This part of API 617 contains information pertinent to all equipment covered by the other parts of this document. It shall be used in conjunction with the following parts, as applicable to the specific equipment covered:

— Part 2—Nonintegrally Geared Centrifugal and Axial Compressors,

— Part 3—Integrally Geared Centrifugal Compressors,

— Part 4—Expander-compressors.

Document Type : Complete Document

Edition : Eighth Edition

Language : English

Page Count : 386

Publication Date : 09/01/2014

Revision : 8

Status : Historical

Title : Axial and Centrifugal Compressors and Expander-compressors

Publication Date: 07/01/2002 - Complete Document Changes Incorporated *

Description :

This standard covers the minimum requirements for axial compressors, single-shaft and integrally geared process centrifugal compressors and expander-compressor for use in the petroleum, chemical, and gas industries services that handle air or gas.

This standard does not apply to fans (covered by API Std 673) or blowers that develop less than 34 kPa (5 psi) pressure rise above atmospheric pressure. This standard also does not apply to packaged, integrally-geared centrifugal plant and instrument air compressors, which are covered by API Std 672. Hot gas expanders over 300°C (570°F) are not covered in this standard.

This chapter contains information pertinent to all equipment covered by this standard. It is to be used in conjunction with the following chapters as applicable to the specific equipment covered:

Chapter 2—Centrifugal and Axial Compressors

Chapter 3—Integrally Geared Compressors

Chapter 4—Expander-compressors

Note: A bullet ( • ) at the beginning of a paragraph indicates that either a decision is required or further information is to be provided by the purchaser. This information should be indicated on the data sheets (see Annex A of Chapters 2, 3 and 4); otherwise, it should be stated in the quotation request (inquiry) or in the order.

Document Type : Complete Document

Edition : Seventh Edition; Errata: June 1, 2003

Language : English

Page Count : 290

Publication Date : 07/01/2002

Revision : 7

Status : Historical

Supplement : W/

Title : Axial and Centrifugal Compressors and Expander-compressors for Petroleum, Chemical and Gas Industry Services

Publication Date: 06/01/2003 - Amendment

Document Type : Amendment

Page Count : 57

Publication Date : 06/01/2003

Revision : 7

Status : Historical

Title : AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS

Publication Date: 07/01/2002 - Base Document *

Description :

This standard covers the minimum requirements for axial compressors, single-shaft and integrally geared process centrifugal compressors and expander-compressor for use in the petroleum, chemical, and gas industries services that handle air or gas.

This standard does not apply to fans (covered by API Std 673) or blowers that develop less than 34 kPa (5 psi) pressure rise above atmospheric pressure. This standard also does not apply to packaged, integrally-geared centrifugal plant and instrument air compressors, which are covered by API Std 672. Hot gas expanders over 300°C (570°F) are not covered in this standard.

This chapter contains information pertinent to all equipment covered by this standard. It is to be used in conjunction with the following chapters as applicable to the specific equipment covered:

Chapter 2 - Centrifugal and Axial Compressors

Chapter 3 - Integrally Geared Compressors

Chapter 4 - Expander-compressors

Note: A bullet • at the beginning of a paragraph indicates that either a decision is required or further information is to be provided by the purchaser. This information should be indicated on the data sheets (see Annex A of Chapters 2, 3 and 4); otherwise, it should be stated in the quotation request (inquiry) or in the order.

Document Type : Base Document

Edition : Seventh Edition

Language : English

Page Count : 234

Publication Date : 07/01/2002

Revision : 7

Status : Historical

Title : Axial and Centrifugal Compressors and Expander-Compressors for Petroleum, Chemical and Gas Industry Services

Publication Date: 01/01/1995 - Complete Document *

Description :

This standard covers the minimum requirements for centrifugal compressors used in petroleum, chemical, and gas industries services that handle air or gas. This standard does not apply to fans or blowers that develop less than 34 kPa (5 pounds per square inch) pressure rise above atmospheric pressure; these are covered by API Standard 673. This standard also does not apply to packaged, integrally-geared centrifugal air compressors, which are covered by API Standard 672.

Note: A bullet (•)at the beginning of a paragraph indicates that a decision is required or further information is to be provided by the purchaser. This information should be indicated on the data sheets (see Appendix A); otherwise it should be stated in the quotation request or in the order.

Document Type : Complete Document

Edition : Errata June 15, 1998

Language : English

Page Count : 106

Publication Date : 01/01/1995

Revision : 6

Status : Historical

Title : Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries

Publication Date: 06/15/1998 - Complete Document *

Document Type : Complete Document

Edition : SIXTH EDITION

Language : English

Page Count : 5

Publication Date : 06/15/1998

Revision : 6

Status : Historical

Title : Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries

Publication Date: 01/01/1995 - Base Document

Description :

1.1 Scope

This standard covers the minimum requirements for centrifugal compressors used in petroleum, chemical, and gas industries services that handle air or gas. This standard does not apply to fans or blowers that develop less than 34 kPa (5 pounds per square inch) pressure rise above atmospheric pressure; these are covered by API Standard 673. This standard also does not apply to packaged, integrally-geared centrifugal air compressors, which are covered by API Standard 672.

Note: A bullet (•) at the beginning of a paragraph indicates that a decision is required or further information is to be provided by the purchaser. This information should be indicated on the data sheets (see Appendix A); otherwise it should be stated in the quotation request or in the order.

Document Type : Base Document

Language : English

Page Count : 101

Publication Date : 01/01/1995

Revision : 6

Status : Historical

Title : Centrifugal Compressors for Petroleum, Chemical, and Gas Service Industries

Publication Date: 04/01/1988 - Complete Document *

Description :

This standard covers the minimum requirements for centrifugal compressors used in refinery service that handle air or gas. This standard does not apply to fans or blowers that develop less than 5 pounds per square inch (0.34 bar) pressure rise above atmospheric pressure; these are covered in API Standard 673. This standard also does not apply to packaged, integrally geared centrifugal air compressors, which are covered in API Standard 672.

Note: A bullet (•) at the beginning of a paragraph indicates that either a decision is required or further information is to be provided by the purchaser. This information should be indicated on the data sheets (see Appendix A); otherwise it should be stated in the quotation request or in the order.

Document Type : Complete Document

Edition : Fifth Edition

Language : English

Page Count : 81

Publication Date : 04/01/1988

Revision : 5

Status : Historical

Title : Centrifugal Compressors for General Refinery Service

Publication Date: 11/01/1979 - Complete Document Changes Incorporated *

Description :

This standard is intended to cover the minimum requirements for centrifugal compressors used in refinery services handling air or gas. It does not cover machines which may be classed as fans or blowers that develop less than 5 pounds per square inch (0.34 bar) from atmospheric pressures or packaged integrally geared centrifugal air compressors, which are covered by API Standard 672.

NOTE: A bullet (e) in the margin indicates where a decision by the purchaser is required. These decisions should be indicated directly on the data sheets when provisions are made for them; otherwise, they should be stated in the quotation request or in the order.

Document Type : Complete Document

Edition : Fourth Edition: Includes Addendum: November 1979 and Errata: February 1983

Language : English

Page Count : 70

Publication Date : 11/01/1979

Revision : 4

Status : Historical

Supplement : W/

Title : Centrifugal Compressors for General Refinery Services

Publication Date: 10/01/1973 - Complete Document *

Document Type : Complete Document

Edition : THIRD EDITION

Language : English

Page Count : 38

Publication Date : 10/01/1973

Revision : 3

Status : Historical

Title : CENTRIFUGAL COMPRESSORS FOR GENERAL REFINERY SERVICES

Publication Date: 04/01/1963 - Complete Document *

Document Type : Complete Document

Edition : SECOND EDITION

Language : English

Page Count : 39

Publication Date : 04/01/1963

Revision : 2

Status : Historical

Title : CENTRIFUGAL COMPRESSORS FOR GENERAL REFINERY SERVICES

Publication Date: 06/01/1958 - Complete Document *

Document Type : Complete Document

Edition : FIRST EDITION

Language : English

Page Count : 31

Publication Date : 06/01/1958

Revision : 1

Status : Historical

Title : CENTRIFUGAL COMPRESSORS FOR GENERAL REFINERY SERVICES

See More titles in STD